*This product is a handle only.
Width: 760mm
Pull bag: approx. 14cm
The wiring is through the center.
Black powder coat finish.
The thickness of the riser mounting position is "1-1/4".
The thickness of the handle is the same as the genuine product.
Compatible models: FXSB (Breakout Standard) / FXSBSE (Breakout CVO)
*Can be installed on either electronic throttle or wire throttle.
[When installing on FXSB Standard]
By using it in combination with the "30mm UP riser collar / FXSB", you can get an even more comfortable position.
There is no need to replace cables even when using it in combination with a riser collar.
(※Note 1: If you do not use riser collars, the cables may interfere with the tank depending on the installation angle)
(※Note 2: If you use riser collars together, the cables will not have excess slack)
[When installing on FXSBSE CVO]
If you replace only the handlebars, they will interfere with the tank, so you will need to replace the 52mmUP riser collar and cables.
We recommend that you use the "Drag Bar Kit (760mm) Black/FXSBSE", which includes three items: handlebars, riser collars, and cables, as it is a bolt-on set.
※The installation image is for illustration purposes only. Please note that the color of the actual product may differ.
※Notes※
1. Assembly requires specialized knowledge and skills. We recommend that you ask a specialist store to do the work.
2. Assembly may require the reference of the service manual.
3. Do not start the engine or drive until the work is completely completed.
4. Bolts may loosen due to vehicle vibration, so please check the tightness of the bolts before riding.
Please note that we cannot be held responsible for any damage or accidents that occur if you attempt to install the product yourself.
